HTPC

I finally got around to taking some photos of my HTPC.

Here it is fully assembled in its Mini-ITX chassis

Here it is fully assembled in its Mini-ITX chassis

 

And here is the front bezel of the chassis (Power button w/LED, HDD LED, reset button - the big red one)

And here is the front bezel of the chassis (Power button w/LED, HDD LED, reset button – the big red one)

With the top off. Top tray holds the HDD.

With the top off. Top tray holds the HDD.

 

And here's all the guts. The middle board is the PMU I designed. It is controlled by the blue Arduino Micro on board.

And here’s all the guts. The middle board is the PMU I designed. It is controlled by the blue Arduino Micro on board.

 

Close-up of the PMU. The green terminal block on the right is power input. The block up top is the switched power (to RPi and HDD).

Close-up of the PMU. The green terminal block on the right is power input. The block up top is the switched power (to RPi and HDD).

 

Facebooktwittergoogle_plusredditpinterestlinkedinby feather
Sunday, May 5th, 2013 Arduino, Hardware, Raspberry Pi

Leave a Reply

You must be logged in to post a comment.