HTPC Pt 2

The Raspberry Pi (Model B., revision 2). The brown & black wires go to the RPi reset, and the colored cable goes to the RTC. The purple wire is for shutdown detection.

The Raspberry Pi (Model B., revision 2). The brown & black wires go to the RPi reset, and the colored cable goes to the RTC. The purple wire is for shutdown detection.

 

Better shot of the Pi with the 2-pin header added to the board for reset.

Better shot of the Pi with the 2-pin header added to the board for reset.

The DS1307-based Real-Time Clock (RTC) from Adafruit (http://learn.adafruit.com/adding-a-real-time-clock-to-raspberry-pi/overview)

The DS1307-based Real-Time Clock (RTC) from Adafruit (http://learn.adafruit.com/adding-a-real-time-clock-to-raspberry-pi/overview)

 

The DC-to-DC ATX power supply. The connector was removed and the wires fed into a terminal block for easier wiring. The PMU is powered off the +5V standby lead from PSU (purple lead) and the green wire is the ATX trigger.

The DC-to-DC ATX power supply. The connector was removed and the wires fed into a terminal block for easier wiring. The PMU is powered off the +5V standby lead from PSU (purple lead) and the green wire is the ATX trigger.

Wireless keyboard/mouse combo.  TV remote shown for size comparison.

Wireless keyboard/mouse combo. TV remote shown for size comparison.

 

 

Facebooktwittergoogle_plusredditpinterestlinkedinby feather
Sunday, May 5th, 2013 Arduino, Hardware, Raspberry Pi

Leave a Reply

You must be logged in to post a comment.